Boss Boss EQ-200 Programmable Graphic Equalizer

EQ-200 Graphic Equalizer

SIMPLY SOPHISTICATED

With the 200 series, BOSS introduces a new generation of pedals that pack advanced sound and versatility into a streamlined size that saves space on your board. Grab-and-go controls and multi-function switches make operation easy and intuitive, while onboard memories allow you to store multiple setups for instant recall. All 200 series pedals feature premium audio quality with 32-bit AD/DA, 32-bit internal processing, and 96 kHz sampling rate, as well as support for additional control via external switches, an expression pedal, or MIDI.

The EQ-200 is the most flexible compact EQ ever created for guitar and bass. It features two wide-ranging 10-band EQ channels, plus an onboard graphic display that shows the current EQ curve at a glance. Selectable signal flow structures configure the channels for stereo, parallel, or series operation, and it’s even possible to patch in external pedals for deep pre/post tone shaping. Going further, the frequency centers of all 10 bands can be set to three different types, letting you optimize the EQ-200’s performance for different instruments.

DD-200 EQ-200 First Look

DD-200 Digital Delay provides a vast array of delays with 12 versatile and tweakable delay modes. EQ-200 Graphic Equalizer delivers precision tonal control via dual 10-band EQs with multiple routing options.

• Class-leading sound quality with 32-bit AD/DA, 32-bit floating point processing, and 96 kHz sampling rate
• Dual 10-band EQs that can be used in stereo, parallel, or series
• Insert function for processing external effects with pre and/or post tone shaping
• Three different range settings: 30 Hz to 12.8 kHz, 32.1 Hz to 16 kHz, and 28 Hz to 14 kHz
• 15 dB boost/cut on each band, plus overall level control for each channel
• Stereo link function for operating both EQ channels together
• Intuitive interface with hands-on sliders and graphic EQ display
• Real-time panel setting and four memories for storing favorite sounds
• Panel Lock function disables controls to prevent unwanted changes
• Two onboard footswitches with customizable assignments
• Support for expanded control via external footswitches, an expression pedal, or MIDI
• Full MIDI I/O provided with mini TRS jacks (BMIDI-5-35 adaptor cable available separately)
• Micro USB jack for firmware updates
• Runs on PSA-series AC adaptor or three AA-size batteries
• Dual 10-Band EQs with Adjustable Range

With its refined design, 32-bit/96 kHz engine, and ultra-low noise specs, the EQ-200 delivers precision tonal control with superior audio quality. Up to 15 dB of cut or boost is available on each band, and each channel has a level slider for balancing with the bypass sound or kicking in a solo boost when needed. The center frequency configuration of the bands can also be set to one of three types, letting you optimize the EQ-200’s equalization for all types of instruments, from electric and acoustic guitars to bass, keyboards, and beyond.

Flexible Signal Flow and Pre/Post FX Insert

The EQ-200’s variable signal flow structure offers an uncommon level of versatility in sculpting sounds. The A and B channels can be linked together or used independently, and you can also patch in an external pedal (or a chain of pedals) for pre-EQ and/or post-EQ processing. When used with overdrive and distortion pedals, this provides an exceptional level of power in honing your tone for both rhythm and lead playing. Series mode runs the two EQs one after the other, allowing you to shape your basic tone with one and set up the second for solos or additional sound shaping.

Simple Interface and Visual EQ Display

Using the EQ-200 is fast, intuitive, and frustration-free. Hands-on sliders provide direct access to 10 EQ bands and master channel level, while the informative display offers a visual overview of the current EQ curve. The two channels are toggled with a dedicated panel button, and navigating deeper parameters is quick and efficient. And with the useful Panel Lock function, you can disable the controls to prevent accidental changes while operating other pedals on your board.

Save and Recall Your Favorite Setups

The EQ-200 offers four onboard memories, allowing you to save favorite setups for install recall. There’s also a Manual setting that reflects the current panel settings, essentially giving you a fifth setup to choose from. You can scroll through memories with an EQ-200 footswitch, and it’s even possible to limit the scrolling range or assign memories directly for faster access while performing.

Deep Real-Time Control

By default, the EQ-200’s footswitches control EQ bypass and memory scrolling, but you can reassign them to turn channels on/off, select specific memories, and more. Control is also possible via external footswitches, and these are freely assignable as well. Alternately, you can connect an expression pedal to control A or B channel levels, or even the overall output (a handy stand-in for a volume pedal). MIDI I/O is also available on mini TRS jacks, letting you operate various functions from external MIDI controllers and chain multiple 200 series pedals to select memories on all of them at once.

SPECIFICATIONSSampling Frequency96 kHzAD/DA Conversion32 bitsProcessing32-bit floating pointMemory4 + ManualNominal Input LevelINPUT A/MONO, B: -10 dBuMaximum Input LevelINPUT A/MONO, B: +7 dBuInput ImpedanceINPUT A/MONO, B: 2 M ohmNominal Output LevelOUTPUT A/MONO, B: -10 dBuMaximum Output LevelOUTPUT A/MONO, B: +7 dBuOutput ImpedanceOUTPUT A/MONO, B: 1 k ohmsRecommended Load ImpedanceOUTPUT A/MONO, B: 10 k ohms or greaterBypassBuffered bypassControlsON/OFF switch, MEMORY switch
30--12.8 k sliders, LEVEL slider
A/B button, MEMORY buttonDisplayGraphic LCD (64 x 32 dots, backlit LCD)IndicatorA/B indicator, MEMORY (MAN, 1--4) indicatorsConnectorsINPUT (A/MONO, B) jacks, OUTPUT (A/MONO, B) jacks: 1/4-inch phone type
CTL 1, 2/EXP jack: 1/4-inch TRS phone type
MIDI (IN, OUT) jacks: Stereo miniature phone type
DC IN jack
USB port: USB micro-B type (program update only)Power SupplyAlkaline battery (AA, LR6) x 3, AC adaptor (sold separately)Current Draw170 mAExpected Battery Life Under Continuous UseAlkaline: Approx. 7 Hours
* These figures will vary depending on the actual conditions of use.AccessoriesOwner's Manual
Leaflet "USING THE UNIT SAFELY"
Alkaline battery (AA, LR6) x 3
Rubber foot x 4Options (sold separately)AC adaptor: PSA-S series
Footswitch: FS-5U
Dual footswitch: FS-6, FS-7
Expression pedal: FV-500H, FV-500L, EV-30, Roland EV-5
TRS/MIDI cable: BMIDI-5-35SIZE AND WEIGHTWidth101 mm
4 inchesDepth138 mm
5-7/16 inchesHeight60 mm
2-3/8 inchesHeight (including rubber foot)62 mm
2-1/2 inchesWeight630 g
1 lb 7 ozWeight (including battery)700 g
1 lb 9 oz* 0 dBu = 0.775 Vrms*The specifications are subject to change without notice.

Delivery

We offer FREE DELIVERY on ALL orders within the UK (excludes Highlands & Islands for courier items).

We aim to dispatch all orders placed by 2pm and in stock on the same working day.  If something is out of stock with us then we will order it from our suppliers.  If an item is also out of stock at a supplier, we will contact you with an estimated delivery date.

Standard free delivery orders are usually sent by Royal Mail unless oversize in which case they are sent by courier, and usually arrive within 3 working days.  Express delivery orders are sent on a next working day service.  For clarity, this means an order placed on Friday will be delivered on Monday.  

Delivery to the Highlands & Islands or overseas will usually take longer. 

Returns

We want you to be completely satisfied with your purchase.  We recognise there will be occasions when you wish to return an item.  We offer a no-quibble 14-day returns period.  If you wish to return an item, please contact us via e-mail with your order number and your reason for return.  We will reply within 48 hours providing full return instructions. 

All items returned under our no-quibble returns policy must be in an as-new, resaleable condition including all accessories and retail packaging.  Items where the packaging will be damaged through opening it are not eligible for no-quibble returns.  Hygiene items such as Talk Boxes, Harmonicas, Wind Instruments etc are also ineligible for returns under this policy if there is evidence they have been opened and/or used. Please pack returned items appropriately to ensure no damage in transit.  We reserve the right to refuse refunds for items that are returned in a state which renders them unfit for resale as new. 

Items that are found to be faulty on arrival or within 14 days of receipt will be replaced.  After this period we will honour the manufacturer's warranty period for repairs and items will be repaired or replaced as deemed appropriate. 

Transit Damage & Mispicks

We make every effort to ensure your order arrives complete, correct and in the condition you would expect. In the event that the package shows signs of damage, please mark this when signing for it. In this instance or if your order is incorrect for any reason, please contact us within 24 hours of delivery so that we can rectify the situation. 

CITES

CITES regulations concerning the export of items containing certain woods affect any guitar sold ouside of the European Union and which contains any quantity of either Rosewood or Bubinga.  In these cases, an additional charge of £80.00 will be levied per species after the sale to pay for the required re-export certificate.  There will be a delay in dispatching any guitar containing either Bubinga or Rosewood of up to 4 weeks while we obtain the necessary certification for export. As the charge is per species, where a guitar contains both Bubinga AND Rosewood, the charge is doubled to £160.00.  We will contact you following your purchase of any guitar containing a controlled wood and advise of the charge once you have placed the order.  You can make payment for the charge by sending a Paypal payment to us at: sales@fxpedal.co.uk. 

Note that CITES only applies to guitars containing Rosewood or Bubinga that are being exported outside the European Union.  Guitars being delivered with the United Kingdom or in the European Union will be dispatched as normal. 

You can find out more information about CITES here: https://reverb.com/uk/news/new-cites-regulations-for-all-rosewood-species